How to set-up
What you need
1 x Real Grass Puppy Potty
1 x Piece of turf (trim to size)
1 x 25L bag of potting mix soil
1 x Porous Liner
1. Attach the wheels
Turn the Grassifier upside down and place it flat on the ground.
Push each wheel firmly into the holes on each corner, until they go all the way in.
⚠️ Important: the base must be flat - inserting wheels while holding it in the air will increase difficulty.
For more instructions, please click here.
2. Lay the potty liner
Tear off one porous liner from your roll, and place it into your Grassifier.
If you're using non-porous liner, ensure you poke holes in it to allow drainage to flow through.
3. Add soil
Fill/cover the base of your potty with potting mix soil, about an inch deep. Usually, one 25L bag of potting mix is perfect for the Grassifier.
4. Add your turf
Simply lay your grass strip on top of your bed of potting mix soil. Check our Turf Guide for the best way to fit common size turf.
5. Water your turf
Generously water/soak your new puppy potty to help bed the turf into the soil.
Remember to maintain and water when necessary. Not sure when to water? Check out this handy accessory.
Prefer to grow your own?
You can grow your own grass from seed within 1-2 weeks with our RGPP: Grassifier! Check out how, and watch our time lapse video conducted over 1 week of growing grass from feed.